Term
Description
Omitting
Allows you to manually disable (omit) one or more zones before setting the
system.
Master Code
Is a numerical code used for setting and Unsetting the system as well as allowing
access to functions such as adding and deleting user codes etc.
Master Area Keypad
This Keypad can only be used if your system Areas (CC488 Only). The Keypad
allows you to view and operate both areas from the same Keypad.
Monitoring Station
Is a secure location where a digital receiver monitors numerous alarm systems and
deciphers their alarm transmission reports. The operator can then advise the
appropriate authorities to take immediate action.
Panic Alarm
This type of alarm indicates to the monitoring station that there is an emergency
situation at your premises.
Closed
Refers to zone status. If a zone is Closed, the detection device is not violated and
the zone indicator will not be displayed on the Keypad.
Sensor Watch
Sensor watch gives the control panel the ability to recognise that detection devices
may have stopped working or that the view to a PIR detector has been blocked,
thus unable to detect any movement over the duration of the time programmed by
your Engineer.
Silent Alarm
Your Engineer may program zones for silent operation. This means that when the
zone programmed for silent operation has been violated during the Set period, your
alarm system will communicate with the monitoring station without sounding the
sirens.
STAY Mode 1
Is a condition that automatically omits zones when your system is Set in STAY
Mode 1. Only your Engineer can program zones to be omitted automatically in
STAY Mode 1.
STAY Mode 2
Is a condition that automatically omits zone when your system is Set in STAY
Mode 2. Only the Master Code holder can program zones to be omitted
automatically in STAY Mode 2.
Call Divert Set Sequence
Call Divert setting is a feature that automatically calls the telephone exchange and
diverts your telephone number to another telephone when the system is Set in
AWAY Mode.
Call Divert Unset
Sequence
Call Divert Unsetting automatically calls the telephone exchange and un-diverts
your telephone number.
Open
Refers to zone status. A zone is Open when a zone has been violated. The
corresponding zone indicator will display on the Keypad.
User Code
A user code is the personal identification number that the operator uses to Set and
Unset the system.
Zones
A monitored input used to trigger an alarm condition when violated.
24-Hour Zones
A monitored input programmed to trigger an alarm condition when violated when
the system is Set or Unset 24-hours a day.
32
Solution
Ultima Operators Manual
Operators Manual UK
Detection Systems
