Dentsply Sirona
Operating Instructions SiroLaser Blue
5 Operation
5.5 Main home screen
66 56 842 D3648
D3648.201.03.02.02 10.2018
51
5.5.3.2.5
Software update
If a software update of the SiroLaser Blue is needed, please proceed as
follows:
CAUTION
Use a USB class 2.0 (or above) memory stick.
To perform the software download, use a USB stick with a minimum
capacity of 512 MB.
Specify the USB configuration that is FAT32 and NTFS.
1.
Choose the "Settings" item in the main menu.
2.
Choose "Software update".
3.
Follow the instructions and insert the USB stick.
NOTE
The system requires approx. 5 seconds to detect the USB stick.
Ä
The message "updating software..." and an hour glass appears
which indicates that the software update is in progress.
Ä
After this, the unit automatically reboots with the 2 LEDs lighting
orange and a white screen.
CAUTION
Leave the USB stick and the power cable plugged in until the
completion of software update.
The software update may take up to five minutes.
4.
Enter the pin code.
Ä
The software update was successfully performed. The USB
stick can be removed.
5.5.3.2.6
History file
After having finished a treatment, all parameters will be saved and
documented in the history file - i.e. user name, application, date & time,
as well as power, laser activation time, energy, and average power of
the treatment.
NOTE
A maximum of 50 treatments is possible to be stored. If the maximum
is reached, the 51st treatment will replace the 1st treatment.
When downloading a history file, the data of the user associated with
the treatment history will be deleted from the control unit.
CAUTION
Use only USB Class 2.0 memory sticks.
To perform a download of history files, use a USB stick with a
minimum capacity of 512 MB.
➢ To download a history file, please insert the USB mass storage
device and press the 'save' button.
Ä
Proceed as instructed on the screen.
