Dentsply Sirona
Operating Instructions SiroLaser Blue
5 Operation
5.5 Main home screen
66 56 842 D3648
D3648.201.03.02.02 10.2018
41
5.5.1
Self Test
After booting, the SiroLaser Blue will automatically perform a self test
including a status check of the following functions:
● Wireless foot control vs. finger switch
● USB port
In addition, you will be informed when the next calibration check or
when the next servicing is due.
The statuses are displayed on the home screen.
Foot control
If the wireless foot control is selected the appropriate symbol for foot
control will be displayed on the home screen confirming selected.
If the wireless foot control is not selected the appropriate symbol for foot
control will not be displayed on the home screen.
NOTE
If the wireless foot control is selected but not detected, please
perform the registry of the wireless foot control and/or check the
battery, see chapter "Install wireless foot control – optional [→ 34]".
If the wireless foot control remains not selectable please contact your
local dental dealer or an authorized Customer Service Department for
technical support.
Finger switch
If the finger switch is connected the appropriate symbol for finger switch
will be displayed on the home screen confirming checked and selected.
If the finger switch is not selected the appropriate symbol for finger
switch will not be displayed on the home screen.
NOTE
If the finger switch is defective/missing the unit shows an error
message after booting. In this case please check the cable
connection to the SiroLaser Blue control unit, see chapter
"Troubleshooting of simple defects". If the finger switch remains
defective/missing, please contact your local dental dealer or an
authorized Customer Service Department for technical support.
In general: If any switch is defective laser will be blocked.
