94
6-7. ZONE3 and ZONE4 tone control and channel level setting
1
Select “Zone3/4 Tone/Ch Lev.” at the Zone Setup
menu.
• Adjust the sound output from ZONE3 and ZONE4.
Z o n e 3 / 4
* Z o n e S e t u p
2
Display the Zone3/4 Tone/Ch Lev. screen.
(Main unit)
(Remote control unit)
(Main unit)
(Remote control unit)
3
Select the Zone whose sound you want to adjust.
(ZONE3, ZONE4)
Switch to the setting screen.
(Main unit)
(Remote control unit)
(Main unit)
(Remote control unit)
B a s s : 0 d B
* Z 3 T o n e / C h L e v
4
q
Select the item to be set.
w
Adjust the parameter.
Bass
:
Adjust the tone for the bass.
Treble
:
Adjust the tone for the treble.
(The bass or treble sound can be adjusted between –12 dB and +12 dB in steps of 2.0 dB.)
HPF
:
Set this to “ON” if your speakers do not have a very strong capacity for producing low bass. Using the high pass filter
makes it possible to reduce distortion of the bass sound.
Channel Level :
Set so that the playback level is the same for the left and right channels.
(The volume can adjusted between –12 dB and +12 dB in steps of 1.0 dB.)
(Main unit)
(Remote control unit)
(Main unit)
(Remote control unit)
Example: When “Zone3” is selected
5
Press the ENTER button to return to the Zone3/4 Tone/Ch Lev. screen.
Use the same procedure to make the settings for ZONE4.
(Main unit)
(Remote control unit)
Z 3 T o n e / C h L e v .
* Z o n e 3 / 4
