41
V
. Check of the measurement result
• The results of the measured items can be checked.
For instructions on checking the equalizer parameters, see pages 46 ~ 48.
1
Select the items.
The measurement results of each item can be
checked here.
S p C o n f i g . C h e c k
* A u t o S e t u p
(Main unit)
(Remote control unit)
2
Press the ENTER button and display the verification screen.
Press the ENTER button to switch to the second screen.
(Main unit)
(Remote control unit)
[Delay Time Check]
NOTE:
• When measurements have been made using the measurement microphone, speakers
with a built-in filter such as subwoofers might be set with a value that differs from the
physical distance because of the internal electrical delay.
[Channel Level Check]
[Speaker Config. Check]
3
If the check ends, press the ENTER button again.
(Main unit)
(Remote control unit)
4
Select whether or not to save the data you have
checked.
Select the following items based on the
measurement results.
Store
:
Set with the checked measurement value.
Cancel :
If you do not want to set the contents
you have checked, cancel the auto setup
settings.
S t o r e
* A u t o S e t u p
(Main unit)
(Remote control unit)
[Crossover Freq. Check]
