132
2
Playback using the DENON LINK connector
Digital transfer and multi-channel playback of DVD-Audio discs and other multi-channel sources is possible by connecting the AVC-A1XVA to a
Denon DVD player equipped with a DENON Link connector using the connection cable included with the DVD player.
With discs on which special copyright protection measures have been taken, however, the digital signals may not be output from the DVD
player. In this case, connect the DVD player’s analog multi-channel output to the AVC-A1XVA’s EXT. IN-1 or EXT. IN-2 terminals for playback.
Also refer to your DVD player’s operating instructions.
Playing audio sources (CDs and DVDs)
The AVC-A1XVA is equipped with three 2-channel playback modes exclusively for music.
Select the mode to suit your tastes.
1
PURE DIRECT mode
In this mode, the music is played with an extremely high level
of sound quality.
When this mode is set, all the video-related circuits are turned
off so that music signals can be reproduced with high quality.
When an analog mode is selected, the digital processing
circuitry is also turned off to achieve analog sound with even
higher purity. (See NOTES page 132)
2
DIRECT mode
Use this mode to achieve good quality 2-channel sound while
watching images. In this mode, the audio signals bypass such
circuits as the tone circuit and are transmitted directly,
resulting in good quality sound.
3
STEREO mode
Use this mode to adjust the tone and achieve the desired
sound while watching images.
• The mode switches as shown below each time the
DIRECT/STEREO button on the Main unit is pressed.
1
2,3
4
2, 3
1
(Main unit)
(Remote control unit)
(Main unit)
(Remote control unit)
STEREO
DIRECT
(Main unit)
(Remote control unit)
4
VIDEO ON/OFF button
When no video signals of a DVD, etc., are connected to the
AVC-A1XVA and the DVD, etc., are connected directly to a TV,
etc., the unneeded video circuitry can be turned off by
selecting the “VIDEO OFF” setting.
(Main unit)
NOTES:
• The system setup function cannot be used when the PURE
DIRECT mode is set. To use the system setup function, cancel
the PURE DIRECT mode.
• If the HDMI input terminal is selected, video outputs are
outputted in the PURE DIRECT mode.
• The channel level and surround parameters in the PURE DIRECT
mode are the same as in the DIRECT mode.
When press SURROUND PARAMETER:
The subwoofer output can be controlled directly.
