19
Connecting the ZONE2 jacks
L
R
R
L
OUTPUT
INPUT
AUX OUT
Another room
INFRARED RETRANSMITTER
Power amplifier
INFRARED SENSOR
Extension jacks for future use.
For instructions on operations using the MULTI ZONE jacks, see pages 166 ~ 179.
See pages 169, 170 for the connection method of ZONE3 and ZONE4.
Connecting a component with video and audio jacks to the V.AUX input jacks
• To connect the video signal, connect using a 75
Ω
/ohms video signal cord.
R
VIDEO OUT
S-VIDEO OUT
OPTICAL
L
OUTPUT
R
VIDEO OUT
S-VIDEO OUT
L
OUTPUT
LINE OUT
VIDEO OUT
S-VIDEO OUT
LINE OUT
DIGITAL OUT
VIDEO OUT
S-VIDEO OUT
L
R
R
L
R
L
Connecting a Video game
• Connect the Video game component’s output
jacks to this unit’s V. AUX INPUT jacks.
Video game
Video camera
Connecting a video camera
• Connect the video camera component’s output
jacks to this unit’s V. AUX INPUT jacks.
TRIGGER OUT
Turn the DC 12V voltage on and off for the individual functions
and surround modes.
For details, see “Setting the Trigger Out”. (See pages 106, 107)
CONTROL terminal
These terminals are used for an exteral controller.
Perform the following operation before using an external
controller connected to the RS-232C terminal:
1. Press the ON/STANDBY button on the main unit and set
the unit to the operating mode.
2. Perform the operation to turn off the power from the
external control.
3. Check that the product has been set to the standby
mode.
After checking the above, check the connections of the
external controller. Operation is possible.
TV
2
ZONE2 preout CONNECTIONS
• If another power amplifier is connected, the ZONE2 preout (variable level) jacks can be used to play a different program source in ZONE2 the
same time. (See page 166)
• The ZONE2 video out is only use for the ZONE2.
• The connection diagram below is an example of multi-channel playback in ZONE2. Please see page 168 when you would like to have 2-
channel playback in ZONE2.