135
[8] Selection of resolution setting (SCALE)
1
The resolution switches as follows each time the SCALE
button is pressed.
1
(Main unit)
Multi-source recording/playback
[1] Playing one source while recording another (REC OUT mode)
1
Press the ZONE3/4/REC SELECT button
until “ZONE3 SOURCE” appears on the
display.
2
With “ZONE3 SOURCE”displayed, turn
the FUNCTION knob until “RECOUT
SOURCE” appears on the display.
With “RECOUT SOURCE” displayed,
turn the FUNCTION knob to select the
source you wish to record.
• The “REC” indicator lights.
3
Set the recording mode.
• For operating instructions, refer to the manual of the
component on which you want to record.
4
To cancel, turn the function knob and
select “SOURCE”.
2,4 1
R E C O U T S O U R C E
D V D
NOTES:
• Recording sources other than digital inputs selected in the REC
OUT mode are also output to the ZONE3 audio output jacks.
• When the REC OUT mode is selected, the ZONE3 button on the
Remote control unit cannot be operated.
(Main unit)
(Main unit)
(Main unit)
1080p
Through
480p/576p
1080i
720p
Through
480p/576p
1080i
720p
When “HDMI” is selected for the “Scaler” setting:
When “Component” is selected for the “Scaler” setting:
When the SCALE button is pressed, the current setting is
shown on the display. If the SCALE button is pressed
while the current setting is displayed, the “Resolution”
setting can be changed.
See pages 73, 74 for descriptions of the different
resolution settings.
