30
6. Zone Setup
Zone Setup
Default settings
1
3
Speaker
Configuration
Channel Level
The components of the signals output from the various speakers and
the frequency response can be set automatically inside the set by
inputting the existence/absence of combinations of speakers and
their size (corresponding to their low frequency playback capability)
for the speakers used in ZONE2 during surround playback in ZONE2.
This adjusts the volume of the signal output from the various
speakers and subwoofer used in ZONE2.
Front Sp.
Small
Center Sp.
Surround Sp.
Subwoofer
Small
Small
Yes
Front L & R
Center
Surround L & R
Subwoofer
3.6 m (12 ft)
3.6 m (12 ft)
3.0 m (10 ft)
3.6 m (12 ft)
Front L
Front R
Center
Surround R
Subwoofer
0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
4
Delay Time
This parameter is for optimizing the timing of the sound produced
from the various speakers and subwoofer according to the listening
position in ZONE2.
Surround L
0.0 dB
Crossover
Frequency
Set the frequency (in Hz) below which deep bass appearing in the
main channels will be routed to the ZONE2 subwoofer.
5
80 Hz
Page
85
2
Subwoofer
Mode
This selects the subwoofer used in ZONE2 for playing the low base
sound.
LFE
86
87, 88
89, 90
91
Video Setup
This sets whether or not to use the video conversion
function.
Video
Convert
Mode
Audio Delay
6
92, 93
7
Zone3/4
Tone/Ch.Lev.
Adjust the tone and channel level of the sound output
from ZONE3 and ZONE4.
Bass = 0 dB, Treble = 0 dB, HPF = OFF, L/R = 0 dB
94, 95
Set the delay time the sound is synchronized with the
picture which are outputted in ZONE2.
ON
0 ms
93
Zone3
Zone4
Bass = 0 dB, Treble = 0 dB, HPF = OFF, L/R = 0 dB
5. Advanced Playback
Advanced Playback
Default settings
1
2
2ch
Direct/Stereo
Auto Surround
Mode
Turn the audio compression on or off when down-mixing Dolby
Digital signals.
3
Dolby Digital
Setup
The speaker settings can be changed specifically for playing in the 2-
channel direct or stereo mode.
Set the Auto surround mode function.
Basic
OFF
Auto Surround Mode = ON
Page
78
79
80
4
This parameter is for optimizing the Room EQ with which the audio
signals are produced from the speakers.
Manual EQ
Setup
All Channels and Frequency=0dB
81 ~ 83
