Delta Modulon DPH series, User Manual

Page: 226 / 250

7 - 5 8
Modulon DPH Series
Item Sub Item Description
INPUT
CONTACT
Input Contact 1
1. Set the input contact as Normally Open (NO)/ Normally
Closed (NC).
2. Set the title for the input contact, 16 characters at most.
3. Set the Event Type as None/ Information/ Warning/ Alarm.
Input Contact 2
Input Contact 3
Input Contact 4
Not only does the EMS screen show status of the input contacts (please refer to 7.9.7
EMS ), but the Warning screen, Historical Event screen, UPS tri-color LED indicator and
buzzer also response to the status of the input contacts.
NOTE:
For the location of the UPS tri-color LED indicator and buzzer, please refer
to 2.8 Tri-color LED Indicator & Buzzer .
Event Type
of Input
Contact
EMS
DI1~DI4
(LCD)
Tri-color
LED
Indicator
Buzzer
Warning
(LCD)
Historical
Event
(LCD)
None Green Green No Sound No No
Information Green Green No Sound No Yes
Warning Yellow Yellow Short Beep Yes Yes
Alarm Red Red Long Beep Yes Yes
All the above settings are related to the items shown on the EMS screen in the
MEASUREMENT
ĺ
EMS . Please refer to 7.9.7 EMS .
7.10.11 BMS Setting
Path:
SETUP
ĺ%066HWWLQJ
After entering the BMS SETTING*
1 VFUHHQVKRZQLQWKH¿JXUHEHORZ\RXFDQYLHZWKH
Alarm Threshold Values (High & Low)*
2
of Cell Voltage , String Voltage and Ambient
Temperature*
3
of the Main Module and each Ext #n Module of the optional battery
management system (BMS).
You can also set up the following items. These settings must be carried out by qualified
service personnel. Please contact Delta customer service for assistance.