Delta Modulon DPH series, User Manual

Page: 225 / 250

7 - 5 7
7 LCD Display & Settings
On-Line
1
2
3
4
Security
Leakage
Fire
Smoke
UPS-1.1 SETUP MAINTENANCE EVENT LOG LOG IN
Administrator
MEASUREMENT
EMS Setting
10:15
May 25,2018
EMS SETTING INPUT
CONTACT
SENSOR
ID 0 EMS0
Title ID Status
Disable
Input
Contact
NO/NC Title Event Type
Normally Open
Normally Open
Normally Open
Normally Open
Warning
Warning
Warning
Warning
NOTE:
After connecting the optional EMS 1000 (EnviroProbe) to the UPS, you have to
manually set both
ID and Status to enable the EMS function of the UPS. Settings
for the other items can be adjusted according to your needs; the default values are
VKRZQLQWKH¿JXUHVDERYH
Item Sub Item Description
SENSOR
ID
Set the ID # (ID 0/ ID 1/ …/ ID 15) according to the ID DIP
switch set on the EMS 1000 (EnviroProbe) device. For the
ID DIP switch settings, please refer to
7.9.7.1 Connecting
the optional EMS 1000 (EnviroProbe) .
NOTE:
If the ID # setting is wrong, the warning
message ' The EMS 1000 ID # Communication
Fail ' will appear.
Title
Set the title for the EMS 1000 (EnviroProbe) , 16 characters
at most.
Status
The status Enable / Disable determines whether or not
the LCD shows the EMS information of the EMS 1000
(EnviroProbe) device (ID #).
Temperature
Set the temperature (°C) values for Alarm/ Warning/
Recovery.
Humidity Set the Humidity (%) values for Alarm/ Warning/ Recovery.