Delta Modulon DPH series, User Manual

Page: 212 / 250

7 - 4 4
Modulon DPH Series
Item Description
Frequency
Conversation
Mode
Set up the UPS in Frequency Conversation mode. In Frequency
Conversation mode, it is the inverter to supply power to the
FRQQHFWHGORDGVZLWKD¿[HGRXWSXWIUHTXHQF\3OHDVHQRWHWKDWWKH
RXWSXWZLOOEHWHUPLQDWHGRQFHWKHLQYHUWHULVWXUQHGRႇ
NOTE: Frequency Conversion mode is only applicable to
single UPS but not to parallel UPSs.
7.10.3 Output Setting
Path:
SETUP
ĺ2XWSXW6HWWLQJ
After entering the OUTPUT SETTING screen *
1
(shown in the figure below), you can set
XSWKHIROORZLQJLWHPV7KHVHVHWWLQJVPXVWEHFDUULHGRXWE\TXDOL¿HGVHUYLFHSHUVRQQHO
Please contact Delta customer service for assistance.
NOTE: *
1
means that the Administrator password is needed. For password
information, please refer to 7.5 Password Entry .
Bypass
60
1
Hz 240 V
0
0.5 Hz/s
0.5T_AC
2 s 6 s
UPS-1.1 SETUP MAINTENANCE EVENT LOG LOG IN
Administrator
MEASUREMENT
Output Setting
OUTPUT SETTING
Frequency Voltage
0.0 V
Voltage Compensation
PM Redundancy Asnyc Transfer Time
Module Sequential Start System Sequential Start
Slew Rate
10:15
May 25,2018
Item Description
Voltage Set up the output voltage.
Voltage
Compensation
When the UPS is distant from the loads and there is a voltage drop
in the output, you can adjust the INV output voltage amplitude for
voltage compensation.
Frequency
Set up the output frequency as 50Hz (default) or 60Hz. The system
will automatically select the output frequency in accordance with the
bypass power.