background image

 

 

 

 

 

 

 

700 VA - 3000 VA UPS 

 
 
 
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

User’s and Installation Manual

 

I

EMC Statements 

FCC Part 15 

NOTICE: 

Pursuant to section 15 of the FCC rules, this product has been tested and thereby 

complies to the conditions of a Class B (700-1500VA) and Class A (2000-3000VA) digital 
device, which have been established for offering sufficient protection against dangerous 
interference for installation in a residential area. Installation and use of the equipment should 
comply with the instructions provided in order to avoid such interference due to the amount 
of radio frequency energy that is radiated and generated by the equipment. In spite of this, 
we cannot assure that a certain amount of interference may not occur in some installations. If, 
by turning on and off, it can be deduced that your radio or television reception is found to be 
influenced by harmful interference from the equipment, it is recommended to use one of the 
following preventive measures: 

z

 

Place the receiving antenna in a separate location or orientation. 

z

 

Ensure a greater distance is achieved between the receiver and the equipment. 

z

 

Ensure that your equipment is connected to an outlet on a separate circuit than the 
receiver. 

z

 

Contact a technician experienced with radio and TV or a dealer for further assistance. 

ICES-003 

This Class B Interference Causing Equipment meets all requirements of the Canadian 
Interference Causing Equipment Regulations ICES–003. Cet appareil numérique de la classe 
B respecte toutes les exigences du Reglement sur le matériel brouilleur du Canada. 

Declaration of Conformity Request 

Units labeled with a CE mark comply with the following standards and directives: 

z

 

Harmonic Standards: EN 50091-1-1 and EN 50091-2 

z

 

EU Directives:73/23/EEC, Council Directive on equipment designed for use within 
certain voltage limits 

93/68/EEC, Amending Directive 73/23/EEC 

89/336/EEC, Council Directive relating to electromagnetic compatibility 

92/31/EEC, Amending Directive 89/336/EEC relating to EMC 

The EC Declaration of Conformity is available upon request for products with a CE 

mark. 

Summary of Contents for 700VA




















Reviews: