Dell S3845cdn, User Manual

Page: 318 / 612

318
| Understanding Printer Messages
024-703 Unable to print because the number of booklet pages exceeds the maximum number
allowed.
Use paper of less weight. Or, cancel the booklet creation.
024-705 The template was not found.
Delete the data, and try the same operation again.
024-707 The paper type is not supported for duplex or inversion. Change the paper type, or change
to 1-sided printing.
024-708 The paper type is not supported for duplex or inversion. Change the paper type, or change
to face-up printing.
024-742 The number of pages exceeded the maximum number allowed for booklet creation.
Change the printer properties setting to split the pages to create separate volumes, or to
cancel the booklet creation setting.
024-746 The specified paper type is not compatible with the specified paper size, paper tray, output
tray, or 2 sided printing.
024-747 The combination of the specified features such as Document Size, Paper Size, Paper Tray,
2 sided printing, and Output Tray is incompatible.
024-775 The number of pages exceeded the maximum number allowed for booklet creation.
024-910 A paper size mismatch error occurred on Tray 1.
Make sure that the size of paper loaded in the tray is correct and that the paper guides are
set correctly.
024-911 A paper size mismatch error occurred on Tray 2.
Make sure that the size of paper loaded in the tray is correct and that the paper guides are
set correctly.
024-923 The toner cartridge (yellow) is empty. Replace the toner cartridge with a new one.
024-924 The toner cartridge (magenta) is empty. Replace the toner cartridge with a new one.
024-925 The toner cartridge (cyan) is empty. Replace the toner cartridge with a new one.
024-933
024-940
024-941
Replace the drum cartridges.
024-942 Exceeded the maximum number of sheets for a booklet.
024-947 The machine detected that Tray 2 was not installed.
024-950 Load the paper to Tray 1.
024-951 Load the paper to Tray 2.
024-954 Load the paper to the bypass tray.
024-958 The paper size specified for the job does not match the size of paper loaded in the bypass
tray. Load the correct size of paper in the bypass tray.
024-959 The paper size specified for the job does not match the size of paper loaded in Tray 2. Load
the correct size of paper in Tray 1.
024-960 The paper size specified for the job does not match the size of paper loaded in Tray 2. Load
the correct size of paper in Tray 2.
024-965 The paper specified for printing is not loaded in the tray.
024-966 The paper specified for printing cannot be detected.
Change the settings.
024-975 Cancel the booklet mode.
024-985 The bypass tray stopped running due to an obstruction.
Check that the settings of paper size, orientation and paper type are correct.
Status Code Cause and Remedy