Dell Precision NX046 User Manual Download

Page: 154 / 316

154

Adding and Replacing Parts

Locate the three hinge tabs on the edge of the computer.

Grip the sides of the computer cover and pivot the cover up, using the

hinges as leverage points.

Release the cover from the hinge tabs and set it aside in a secure location.

NOTICE:

The computer cooling system cannot function properly while the

computer cover is not installed. Do not attempt to boot the computer before

replacing the computer cover.

1 cover latch release

2 computer cover

3 cover hinges

Summary of Contents for Precision NX046





























































































































































































































































































































Search results

Summary of Contents for Precision NX046

Reviews:

Related manuals for Precision NX046

Brands by name

Popular brands

Dell Precision NX046, User Manual

Search results

Summary of Contents for Precision NX046

Reviews:

Related manuals for Precision NX046

Brands by name

Popular brands