Dell Precision NX046 User Manual Download Page 150

Page: 150 / 316

150

Reinstalling Software

NOTE:

If you wait too long and the operating system logo appears, continue

to wait until you see the Microsoft

Windows

desktop; then, shut down your

computer and try again.

NOTE:

The next steps change the boot sequence for one time only. On the

next start-up, the computer boots according to the devices specified in the

system setup program.

When the boot device list appears, highlight

CD/DVD/CD-RW Drive

and press <Enter>.

Press any key to

Boot from CD-ROM

Follow the instructions on the screen to complete the installation.

Summary of Contents for Precision NX046





























































































































































































































































































































Search results

Summary of Contents for Precision NX046

Reviews:

Related manuals for Precision NX046

Brands by name

Popular brands

Dell Precision NX046, User Manual

Search results

Summary of Contents for Precision NX046

Reviews:

Related manuals for Precision NX046

Brands by name

Popular brands