Dell PowerConnect J-EX4200, Hardware Manual

Page: 104 / 238

4.
Follow instructions for connecting power as appropriate for your site:
•
Connecting AC Power to a J-EX4200 Switch on page 117
5.
Perform initial configuration of the switch by following instructions in “Connecting
and Configuring a J-EX Series Switch (CLI Procedure)” on page 131 or “Connecting and
Configuring a J-EX Series Switch (J-Web Procedure)” on page 133.
6.
Set the switch’s management options by following the appropriate instructions:
• Connecting a J-EX Series Switch to a Network for Out-of-Band Management on
page 120
•
Connecting a J-EX Series Switch to a Management Console on page 121
Related
Documentation
Rack Requirements for J-EX4200 Switches on page 63
•
•
Cabinet Requirements for J-EX4200 Switches on page 64
•
Clearance Requirements for Airflow and Hardware Maintenance for J-EX4200 Switches
on page 66
Unpacking a J-EX4200 Switch
The J-EX4200 switch chassis is a rigid sheet-metal structure that houses the hardware
components. J-EX4200 switches are shipped in a cardboard carton, secured with foam
packing material. The carton also contains an accessory box and quick start instructions.
CAUTION: J-EX4200 switches are maximally protected inside the shipping
carton. Do not unpack the switches until you are ready to begin installation.
To unpack a J-EX4200 switch (see Figure 25 on page 89):
1.
Move the shipping carton to a staging area as close to the installation site as possible,
but where you have enough room to remove the system components.
2.
Position the carton so that the arrows are pointing up.
3.
Open the top flaps on the shipping carton.
4.
Remove the accessory box and verify the contents against the parts inventory on the
label attached to the carton.
5.
Pull out the packing material holding the switch in place.
6.
Verify the chassis components received against the packing list included with the
switch. An inventory of parts provided with a J-EX4200 switch is provided in Table 30
on page 89.
If you have a problem with your order, such as missing parts, wrong parts, or incorrect
billing, contact Dell for customer assistance. Have your invoice or packing slip handy
88
Dell PowerConnect J-Series J-EX4200 Ethernet Switch Hardware Guide