Dell PowerConnect J-EX4200 Hardware Manual Download Page 30

Page: 30 / 238

Table 7: LCD Panel Menu Options in J-EX4200 Switches

(continued)

Description

The Status menu has the following options:

•

Show VCP status—Choose one of the following:

•

Press the

Enter

button to display the Virtual Chassis port (VCP) status: Up, Down, Disabled. This menu

option is available only for a J-EX4200 switch that is a member of a Virtual Chassis configuration.

•

Press the

button to go to the next option in the Status menu.

•

Show PSU status—Choose one of the following:

•

Press the

Enter

button to display the status of the power supply: OK, Failed, Absent.

•

Press the

button to go to the next option in the Status menu.

•

Show Environment status—Choose one of the following:

•

Press the

Enter

button to display the status of the fan and temperature:

•

Fan status: OK, Failed, Absent

•

Temp status: OK, High, Shutdown

•

Press the

button to go to the next option in the Status menu.

•

Show Junos OS version—Choose one of the following:

•

Press the

Enter

button to version of Junos OS for J-EX Series switches loaded on the switch.

•

Press the

button to go to the next option in the Status menu.

•

EXIT STAT MENU?—Choose one of the following:

•

Press the

Enter

button to exit the Status menu. Then press the

button to go to the Maintenance

menu.

•

Press the

button to return to the Show VCP status option.

If you do not want users to use Status menu options, disable the entire menu or individual menu options. See
the instructions for configuring the LCD panel on J-EX Series switches in the

Dell PowerConnect J-Series Ethernet

Switch Complete Software Guide for Junos OS: Volume 1

http://www.support.dell.com/manuals

STATUS

Dell PowerConnect J-Series J-EX4200 Ethernet Switch Hardware Guide

Summary of Contents for PowerConnect J-EX4200















































































































































































































































Search results

Summary of Contents for PowerConnect J-EX4200

Reviews:

Brands by name

Popular brands

Dell PowerConnect J-EX4200, Hardware Manual

Search results

Summary of Contents for PowerConnect J-EX4200

Reviews:

Brands by name

Popular brands