Dell PowerConnect J-EX4200, Hardware Manual

Page: 88 / 238

International Electrotechnical Commission (IEC) standard 60320. The plug at the male
end of the power cord fits into the power source outlet that is standard for your
geographical location.
CAUTION: The AC power cord for the switches is intended for use with that
switch only and not for any other use.
NOTE: In North America, AC power cords must not exceed 4.5 meters
(approximately 14.75 feet) in length, to comply with National Electrical Code
(NEC) Sections 400-8 (NFPA 75, 5-2.2) and 210-52 and Canadian Electrical
Code (CEC) Section 4-010(3). The cords separately orderable as FRUs are
in compliance.
Table 29 on page 72 lists AC power cord specifications provided for each country or
region.
Table 29: AC Power Cord Specifications
Plug Standard Electrical Specification Country/Region
RA/3, IRAM 2073 250 VAC, 10 A, 50 Hz Argentina
AS/NZ 3112 250 VAC, 10 A, 50 Hz Australia
BR/3, NBR 14136 250 VAC, 10 A, 60 Hz Brazil
GB2099 and GB1002 250 VAC, 10 A, 50 Hz China
CEE (7) VII 250 VAC, 10 A, 50 Hz Europe (except Italy, Switzerland,
and United Kingdom)
IND/3, IS 1293 250 VAC, 10 A, 50 Hz or 60 Hz India
IL/3G, SI 32/1971 250 VAC, 10 A, 50 Hz Israel
CEI 23-16 250 VAC, 10 A, 50 Hz Italy
JIS C8303 125 VAC, 12 A, 50 Hz or 60 Hz Japan
NEMA 5-15 125 VAC, 13 A, 60 Hz North America
ZA/3, SABS 164/1:1992 250 VAC, 10 A, 50 Hz South Africa
SEV 1011 SEV 6534/2 250 VAC, 10 A, 50 Hz Switzerland
CNS 10917 (NEMA 5-15-P) 125 VAC, 10 A, 60 Hz Taiwan
BS 1363/A 250 VAC, 10 A, 50 Hz United Kingdom
72
Dell PowerConnect J-Series J-EX4200 Ethernet Switch Hardware Guide