Dell PowerConnect J-EX4200 Hardware Manual Download Page 29

Page: 29 / 238

In the maintenance mode, the second line displays one of the following options that you
can use to configure and troubleshoot the switch:

•

System halt

•

System reboot

•

Load rescue

•

Request VC port (for a switch that is a member of a Virtual Chassis)

•

Factory default

•

System EZSetup

LCD Panel Menus

The LCD panel has three menus: Idle, Status, and Maintenance. Toggle between the LCD
panel menus by pressing the

button. Navigate through the menu options by pressing

the

Enter

button.

Table 7 on page 13 describes the LCD panel menu options.

Table 7: LCD Panel Menu Options in J-EX4200 Switches

Description

In the Idle menu:

•

Press

Enter

to cycle through the Status LED modes:

•

ADM (administrative status)

•

DPX (duplex)

•

Power over Ethernet (PoE)

•

SPD (speed)

See “Network Port LEDs in J-EX4200 Switches” on page 18 for information on the Status LED modes.

•

Press

to exit the Idle menu and go to the Status menu.

IDLE

Chapter 2: Component Descriptions

Summary of Contents for PowerConnect J-EX4200















































































































































































































































Search results

Summary of Contents for PowerConnect J-EX4200

Reviews:

Brands by name

Popular brands

Dell PowerConnect J-EX4200, Hardware Manual

Search results

Summary of Contents for PowerConnect J-EX4200

Reviews:

Brands by name

Popular brands