Dell PowerConnect 54 Series, User Manual

Page: 325 / 416

Configuring Device Information
325
Defining Link Aggregation Port Parameters
1
Open the LACP Parameters page.
2
Complete the fields in the Port Parameters area.
3
Click Apply Changes .
The parameters are defined, and the device is updated.
Displaying the LACP Parameters Table
1
Open the LACP Parameters page.
2
Click Show All .
The LACP Parameters Table opens.
Configuring LACP Parameters Using CLI Commands
The following table summarizes the equivalent CLI commands for configuring LACP parameters as
displayed in the
LACP Parameters page.
The following is an example of the CLI commands:
Table 7-36. LACP Parameters CLI Commands
CLI Command Description
lacp system-priority value Configures the system priority.
lacp port-priority value Configures the priority value for physical ports.
lacp timeout
{
long
|
short
}
Assigns an administrative LACP timeout.
show lacp ethernet interface
[
parameters
|
statistics
|
protocol-state
]
Displays LACP information for ethernet ports.
Console (config)# lacp system-priority 120
Console (config)# interface ethernet g1
Console (config-if)# lacp port-priority 247
Console (config-if)# lacp timeout long
Console (config-if)# end
Console# show lacp ethernet g1 statistics
Port g1 LACP Statistics:
LACP PDUs sent:2
LACP PDUs received:2