Dell PowerConnect 54 Series, User Manual

Page: 254 / 416

254
Configuring Device Information
The following is an example of the CLI commands:
Console (config)# interface ethernet g5
Console (config-if)# description RD SW#3
Console (config-if)# shutdown
Console (config-if)# no shutdown
Console (config-if)# speed 100
Console (config-if)# duplex full
Console (config-if)# negotiation
Console (config-if)# back-pressure
Console (config-if)# flowcontrol on
Console (config-if)# mdix auto
Console (config-if)# exit
Console (config)# exit
Console# show interfaces configuration ethernet g5
Port Type Duplex Speed Neg Flow
Control Admin
State Back
Pressure Mdix
Mode
---- ----- ------ ------ ---- ------ ----- ------ ----
g5 1G Full 100 Enabled On Up Enable Auto
console#
console# show interfaces status ethernet g5
Port Type Duplex Speed Neg Flow
Control Link
State Back
Pressure Mdix
Mode
---- ----- ------ ------ ---- ------ ----- ------ ----
g5 1G Full 100 Enabled On Up Disabled on
console#