Dell PowerConnect 54 Series User Manual Download Page 144

Page: 144 / 416

144

Configuring System Information

Figure 6-48. Local User Database

The

Local User Database

page contains the following fields:

•

User Name

— List of users.

•

Access Level

— User access level. The lowest user access level is

and

is the highest user access

level. Users with access level 15 are Privileged Users, and only they can access and use the OpenManage
Switch Administrator.

•

Password (0-159 Characters)

— User-defined password.

•

Confirm Password

— Confirms the user-defined password.

•

Aging (1-365)

— Indicates the amount of time in days that elapses before a password is aged out, when

selected.

•

Expiry Date

— Indicates the expiration date of the user-defined password.

•

Lockout Status

— Specifies the number of failed authentication attempts since the user last logged in

successfully, when the Enable Login Attempts checkbox is selected in the

Password Management

page.

Specifies

LOCKOUT

, when the user account is locked.

•

Reactivate Suspended User

— Reactivate the specified user’s access rights, when selected. Access rights

can be suspended after unsuccessfully attempting to login.

•

Remove

— Removes users from the

User Name

list, when selected.

Summary of Contents for PowerConnect 54 Series

































































































































































































































































































































































































































Search results

Summary of Contents for PowerConnect 54 Series

Reviews:

Related manuals for PowerConnect 54 Series

Brands by name

Popular brands

Dell PowerConnect 54 Series, User Manual

Search results

Summary of Contents for PowerConnect 54 Series

Reviews:

Related manuals for PowerConnect 54 Series

Brands by name

Popular brands