Dell PowerConnect 54 Series User Manual Download Page 186

Page: 186 / 416

186

Configuring System Information

Check

View

to create a new view, or select an existing view Name. A view defines the objects available to

the community.

•

Advanced

— Selects an advanced SNMP view.

•

Group Name

— Name of previously defined groups. The group defines the objects available to the

community.

•

Remove

— Removes a community, when selected.

Defining a New Community

Open the

SNMP Community

page.

Click

Add

The

Add SNMP Community

page opens:

Figure 6-82. Add SNMP Community

Select one of the following:

•

SNMP Management Station

— Defines an SNMP community for a specific management station.

(A value of 0.0.0.0 specifies all management stations.)

•

All

— Defines an SNMP community for all management stations.

Define the remaining fields.

Click

Apply

Changes

The new community is saved, and the device is updated.

Displaying all Communities

Open the

SNMP Community

page.

Click

Show All.

The

Community Table

opens:

Summary of Contents for PowerConnect 54 Series

































































































































































































































































































































































































































Search results

Summary of Contents for PowerConnect 54 Series

Reviews:

Related manuals for PowerConnect 54 Series

Brands by name

Popular brands

Dell PowerConnect 54 Series, User Manual

Search results

Summary of Contents for PowerConnect 54 Series

Reviews:

Related manuals for PowerConnect 54 Series

Brands by name

Popular brands