Dell PowerConnect 54 Series, User Manual

Page: 307 / 416

Configuring Device Information
307
• Ingress Filtering — Enables or disables Ingress filtering by the LAG. Ingress filtering discards packets
that are destined to VLANs of which the specific port is not a member.
• Current Reserve VLAN — The VLAN currently designated as the reserved VLAN.
• Reserve VLAN for Internal Use — The VLAN that is designated as the reserved VLAN after the device
is reset.
Assigning VLAN LAG Settings:
1
Open the VLAN LAG Setting page.
2
Select a LAG from the LAG drop-down menu and complete the fields on the page.
3
Click Apply Changes .
The VLAN LAG parameters are defined, and the device is updated.
Displaying the VLAN LAG Table
1
Open the VLAN LAG Setting page.
2
Click Show All .
The VLAN LAG Table opens.
Assigning LAGs to VLAN Groups Using CLI Commands
The following table summarizes the equivalent CLI commands for assigning LAGs to VLAN groups as
displayed in the
VLAN LAG Setting page.
Table 7-29. LAG VLAN Assignments CLI Commands
CLI Command Description
switchport mode {access | trunk
| general
}
Configures a port VLAN membership mode.
switchport trunk native vlan
vlan-id
Defines the port as a member of the specified
VLAN, and the VLAN ID as the port default
VLAN ID (PVID).
switchport general pvid vlan-id Configure the Port VLAN ID (PVID) when the
interface is in general mode.
switchport general allowed vlan
add
vlan-list [ tagged |
untagged
]
Adds or removes VLANs from a general port.
switchport general acceptable-
frame-type tagged-only Discards untagged packets at ingress.
switchport general ingress-
filtering disable Disables port ingress filtering.