Dell PowerConnect 54 Series User Manual Download Page 180

Page: 180 / 416

180

Configuring System Information

•

Operation

— Defines the group access rights. The possible field values are:

–

Read

— The management access is restricted to read-only, and changes cannot be made to the

assigned SNMP view.

–

Write

— The management access is read-write and changes can be made to the assigned SNMP view.

–

Notify

— Sends traps for the assigned SNMP view.

Defining SNMP Groups

Open the A

ccess Control Group

page.

Click

Add

The

Add

Access Control Group

page opens:

Figure 6-76. Add an Access Control Group

Define the fields in the

Add an Access Control Group

page.

Click

Apply

Changes

The group is added, and the device is updated.

Displaying the Access Table

Open the

Access Control Group

page.

Click

Show All

Summary of Contents for PowerConnect 54 Series

































































































































































































































































































































































































































Search results

Summary of Contents for PowerConnect 54 Series

Reviews:

Related manuals for PowerConnect 54 Series

Brands by name

Popular brands

Dell PowerConnect 54 Series, User Manual

Search results

Summary of Contents for PowerConnect 54 Series

Reviews:

Related manuals for PowerConnect 54 Series

Brands by name

Popular brands