Dell PowerConnect 54 Series, User Manual

Page: 239 / 416

Configuring Device Information
239
Figure 7-15. ACL Bindings Table
Copying ACL Parameters Between Interfaces
1
Open the Network Security - ACL Binding page.
2
Click Show All. The ACL Bindings Table opens.
3
In the Copy Parameters from field, select a Port or LAG from which you want to copy ACL settings.
4
In the table, check the Copy to checkbox for each entry to which you want to copy the settings.
5
Click Apply Changes .
Removing ACL Bindings
1
Open the Network Security - ACL Binding page.
2
Click Show All. The ACL Bindings Table opens.
3
In the table, check the Remove checkbox for each binding you want to remove.
4
Click Apply Changes .
Configuring ACL Bindings with CLI Commands
The following table summarizes the equivalent CLI commands for configuring ACL Bindings .
Table 7-7. ACL Bindings CLI Commands
CLI Command Description
service-acl input acl-name
no service-acl input
To control access to an interface, use the
service-acl command in interface
configuration mode. To remove the
access control, use the no form of this
command.
show access-lists [ name ] Use the show access-lists privileged
EXEC command to display access
control lists (ACLs) configured on the
switch.