Dell PowerConnect 54 Series, User Manual

Page: 110 / 416

110
Configuring System Information
• Interface — The specific interface connected to the device. Click the option button next to Port , LAG , or
VLAN and select the interface connected to the device.
• Host Name — The system name. This field can contain up to 20 characters.
• Remove — When selected, removes DHCP clients.
Adding DHCP Clients
1
Open the DHCP IP Interface page.
2
Click Add .
The Add DHCP IP Interface page opens.
3
Complete the information on the page.
4
Click Apply Changes .
The DHCP Interface is added, and the device is updated.
Modifying a DHCP IP Interface
1
Open the DHCP IP Interface page.
2
Modify the fields.
3
Click Apply Changes .
The entry is modified, and the device is updated.
Deleting a DHCP IP Interface
1
Open the DHCP IP Interface page.
2
Click Show All .
The DHCP Client Table opens.
3
Select a DHCP client entry.
4
Select the Remove check box.
5
Click Apply Changes .
The selected entry is deleted, and the device is updated.
Defining DHCP IP Interfaces Using CLI Commands
The following table summarizes the equivalent CLI commands for defining DHCP clients.
Table 6-18. DHCP IP Interface CLI Commands
CLI Command Description
ip address dhcp
[ hostname host-name ]
To acquire an IP address on an Ethernet interface from the
Dynamic Host Configuration Protocol (DHCP).