Dell PowerConnect 54 Series, User Manual

Page: 273 / 416

Configuring Device Information
273
• GARP Leave All Timer (10 - 2147483640) — Time lapse, in milliseconds, that all devices wait before
leaving the GARP state. The leave all time must be greater than the leave time
.
The possible field value is
0-2147483640. The default value is 10000 msec.
Defining GARP Timers
1
Open the GARP Timers page.
2
Complete the fields.
3
Click Apply Changes .
The GARP parameters are saved to the device.
Copying Parameters in the GARP Timers Table
1
Open the GARP Timers page.
2
Click Show All .
The GARP Timers Table opens.
3
Select the interface type in the Copy Parameters from field.
4
Select an interface in either the Port or LAG drop-down menu.
5
The definitions for this interface is copied to the selected interfaces. See step 6.
6
Select the Copy to check box to define the interfaces to which the GARP timer definitions are copied, or
click Select All to copy the definitions to all ports or LAGs.
7
Click Apply Changes .
The parameters are copied to the selected port ports or LAGs in the GARP Timers Table , and the device
is updated.
Defining GARP Timers Using CLI Commands
This table summarizes the equivalent CLI commands for defining GARP timers as displayed in the GARP
Timers page.
Table 7-18. GARP Timer CLI Commands
CLI Command Description
garp timer {join | leave | leaveall}
timer_value
Adjusts the GARP application join, leave,
and leaveall GARP timer values.