Dell PowerConnect 54 Series, User Manual

Page: 173 / 416

Configuring System Information
173
The following is an example of the CLI commands:
Switch# show lldp neighbors
Defining SNMP Parameters
Simple Network Management Protocol (SNMP) provides a method for managing network devices. Devices
supporting SNMP run a local software (agent).
The SNMP agents maintain a list of variables, which are used to manage the device. The variables are
defined in the Management Information Base (MIB). The MIB contains the variables controlled by the
agent. The SNMP protocol defines the MIB specification format, as well as the format used to access the
information over the network.
Access rights to the SNMP agents are controlled by access strings. To communicate with the device, the
Embedded Web Server submits a valid community string for authentication. To open the SNMP page, click
System
→
SNMP in the tree view.
This section contains information for managing the SNMP configuration.
Defining SNMP Global Parameters
The SNMP Global Parameters page permits enabling both SNMP and Authentication notifications. To
open the SNMP Global Parameters page, click System
→
SNMP
→
Global Parameters in the tree view.
Port Device ID Port
ID Hold
Time
Capabilities System
Name
1
0060.704C.73F
E 1 117 B ts-7800-2
1
0060.704C.73FD
1 93 B ts-7800-2
2
0060.704C.73F
C 9 1 B, R ts-7900-1
3
0060.704C.73FB
1 92 W ts-7900-2