Dell PowerConnect 54 Series, User Manual

Page: 324 / 416

324
Configuring Device Information
Defining LACP Parameters
The LACP Parameters page contains fields for configuring LACP LAGs. Aggregate ports can be linked
into link-aggregation port-groups. Each group is comprised of ports with the same speed.
Aggregated Links can be manually setup or automatically established by enabling Link Aggregation Control
Protocol (LACP) on the relevant links. To open the
LACP Parameters page, click Switch
→
Link
Aggregation
→
LACP Parameters in the tree view.
Figure 7-53. LACP Parameters
• LACP System Priority (1-65535) — The LACP priority value for global settings. The possible range is
1- 65535. The default value is 1.
• Select a Port — The port number to which timeout and priority values are assigned.
• LACP Port Priority (1-65535) — LACP priority value for the port.
• LACP Timeout — Administrative LACP timeout. The possible field values are:
– Short — Specifies a short timeout value.
– Long — Specifies a long timeout value.
Defining Link Aggregation Global Parameters
1
Open the LACP Parameters page.
2
Complete the LACP System Priority field.
3
Click Apply Changes .
The parameters are defined, and the device is updated.