Installing System Components
55
Figure 3-5.
Hard-Drive Bay Numbers (Rack)
Before You Begin
Hard drives are supplied in special hot-pluggable drive carriers that fit in the hard-drive bays. Depending
on your configuration, you received one of the following two drive carrier types:
•
SATA drive carrier — Usable only with a SATA hard drive.
•
SATAu drive carrier — Usable with either a SAS hard drive or a SATA hard drive with a universal
interposer card. The interposer card provides enhanced functionality that makes the SATA hard drive
usable in some storage systems.
NOTICE:
Before attempting to remove or install a drive while the system is running, see the documentation for the
optional SAS RAID controller daughter card to ensure that the host adapter is configured correctly to support hot-
plug drive removal and insertion.
NOTE:
It is recommended that you use only drives that have been tested and approved for use with the SAS
backplane board.
You may need to use different programs than those provided with the operating system to partition and
format SAS or SATA hard drives.
1
1x2 flex bay hard drives
2
1x8 backplane hard drives
1
2
Summary of Contents for POWER EDGE 2900
