
116
Troubleshooting Your System
Checking the Equipment
This section provides troubleshooting procedures for external devices attached to the system, such as the
monitor, keyboard, or mouse. Before you perform any of the procedures, see "Troubleshooting External
Connections" on page 116.
Troubleshooting IRQ Assignment Conflicts
Most PCI devices can share an IRQ with another device, but they cannot use an IRQ simultaneously. To
avoid this type of conflict, see the documentation for each PCI device for specific IRQ requirements.
Table 4-2 lists the IRQ assignments.
Troubleshooting External Connections
Loose or improperly connected cables are the most likely source of problems for the system, monitor, and
other peripherals (such as a printer, keyboard, mouse, or other external device). Ensure that all external
cables are securely attached to the external connectors on your system. See Figure 1-2 for the front-panel
connectors and Figure 1-4 for the back-panel connectors on your system.
Table 4-2.
IRQ Assignment Defaults
IRQ Line
Assignment
IRQ0
System timer
IRQ1
Keyboard controller
IRQ2
Interrupt controller 1 to enable IRQ8 through IRQ15
IRQ3
Serial port 2 (COM2 and COM4)
IRQ4
Serial port 1 (COM1 and COM3)
IRQ5
Remote access controller
IRQ6
Diskette drive controller
IRQ7
Reserved
IRQ8
Real-time clock
IRQ9
ACPI functions (used for power management)
IRQ10
Available
IRQ11
Available
IRQ12
PS/2 mouse port unless the mouse is disabled through the System Setup program
IRQ13
Math coprocessor
IRQ14
IDE CD drive controller
IRQ15
Available
Summary of Contents for POWER EDGE 2900
