Dell OptiPlex HUB, Troubleshooting Manual

Page: 48 / 131

4-6 Diagnostics and Troubleshooting Guide
Run Under Subtest
Run in the Subtest menu displays five categories: One,
Selected, All, Key-Help, and Quit Menu. If you select
One, only the highlighted subtest is run. If you select
Selected, only the selected subtests are run. If you select
All, all of the subtests listed on the screen are run. (The
subtests are run in the same order as they are listed.)
The Key-Help category displays a list of key controls
available. The Quit Menu category returns you to the pre-
vious menu.
Select Under Subtest
Select in the Subtest menu allows you to select individual
subtests to tailor the testing process to your particular
needs. You can choose one or more subtests from the list.
When you choose Select, five categories are displayed:
All, One, Clear All, Key-Help, and Quit Menu.
To select all the subtests, press the <Enter> key when All
is highlighted in the Select menu. To select an individual
subtest, highlight the subtest and press the <Spacebar> or
highlight One and press <Enter>. Press the up- or down-
arrow key to highlight a subtest to be selected.
To reverse a subtest selection, highlight the subtest and
press the <Spacebar>. To clear all selections, select Clear
All.
The Key-Help category displays a list of key controls
available. The Quit Menu category returns you to the pre-
vious menu.
Options Under Subtest
The Options category in the Subtest menu functions the
same way as the Options category in the Main menu. For
information on this category, see “Options” found later in
this chapter.
Test Limits Under Subtest
The Test Limits category in the Subtest menu functions
the same way as the Test Limits category in the Main
menu. For information on this category, see “Test Limits”
found later in this chapter.
About Under Subtest
The About category in the Subtest menu displays infor-
mation about the highlighted subtest.
Key-Help Under Subtest
The Key-Help category in the Subtest menu displays a
list of key controls available.
Quit Menu Under Subtest
The Quit Menu category in the Subtest menu returns you
to the Main menu.
Options
Table 4-1 lists all of the possible values for each global
parameter of Options. A brief description of each param-
eter follows the table. To change Options parameters,
press the <Spacebar>, the left- and right- arrow keys, or
the plus (+) and minus (-) keys.
Number of Times to Repeat Test(s)
This parameter specifies the number of times the tests run
when you select Run. To change the default, type in the
desired value. If you type 0 (zero), the tests will run
indefinitely.
Maximum Errors Allowed
This parameter specifies the maximum number of errors
that can occur before testing is stopped. The error count
begins from zero each time you run a subtest or test
group individually or each time you select All to run all
of them. To change the default, type in the desired value.
If you type 0 (zero), you are specifying that there be no
limit on the number of errors that can occur—testing will
not be stopped, regardless of the number of errors.