To use the computer in a vertical position, you must attach the computer stand:
1.
Place the computer on its right side so that the drive bays are at the bottom.
2.
Fit the stand onto what was the left side of the computer:
a.
Position the stand as shown in the following illustration by aligning the large round hole in the stand with the securing button on the side of the
cover and aligning the captive screw in the stand with the screw hole in the cover.
b.
When the stand is in place, tighten the thumbscrew.
3.
Rotate the computer so that the stand is at the bottom and the drives are at the top.
To remove the stand:
1.
Turn the computer over so that the stand is at the top.
2.
Loosen the thumbscrew and lift the stand away.
3.
Place the computer in a horizontal position.
Back to Contents Page
Summary of Contents for OptiPlex GX60
Page 27: ......
Page 30: ...3 Press Alt b to restart the computer and implement your changes Back to Contents Page ...
Page 140: ...Back to Contents Page ...
Page 174: ......
