Dell EMC VxFlex Ready Node User Manual Download Page 289

Page: 289 / 354

Parameter

Description

Description

Capacity is critical, due to capacity used by
snapshots/thin volumes

Action

Remove unnecessary snapshots or add more
storage

Device capacity has returned to normal

Parameter

Description

Name

DEV_CAPACITY_USAGE_NORMAL

Message

Capacity usage on %s is normal.")

Severity

Info

Description

Capacity usage is back to normal

Action

Not needed

SDS configuration has become invalid

Parameter

Description

Name

SDS_CONFIG_INVALID

Message

CLI_TARGET_NAME_CAP" %s (ID
"MOS_OBJID__FORMAT ") configuration is
invalid.

Severity

Critical

Description

The SDS cannot access its configuration files.

Action

Contact EMC Support

SDS disk errors were fixed

Parameter

Description

Name

SDS_FIX_DISK_ERROR

Message

CLI_TARGET_NAME_CAP" %s (ID
"MOS_OBJID__FORMAT ") device %s fixed
%d disk errors via reads.

Severity

Warning

Description

There were read errors on this device that
were fixed by reading the data from
secondary and re-writing it. This may be a
sign of impending device hardware
malfunction.

Action

Check for hardware malfunction

System events

Dell EMC VxFlex Ready Node AMS User Guide

289

Summary of Contents for EMC VxFlex Ready Node



































































































































































































































































































































































Search results

Summary of Contents for EMC VxFlex Ready Node

Reviews:

Related manuals for EMC VxFlex Ready Node

Brands by name

Popular brands

Dell EMC VxFlex Ready Node, User Manual

Search results

Summary of Contents for EMC VxFlex Ready Node

Reviews:

Related manuals for EMC VxFlex Ready Node

Brands by name

Popular brands