Dell EMC VxFlex Ready Node User Manual Download Page 335

Page: 335 / 354

KVM activities

The KVM console allows you to perform additional server maintenance tasks.

Additional tasks using the KVM console - R630/R740xd servers

You can perform the following additional tasks on a VxFlex Ready Node server using
the KVM console server.

Before you begin

Ensure that you can access the KVM console.
Procedure

1. Open the KVM console, as described in

Open the KVM console - R630/R730xd

servers

on page 330.

2. You can perform the following tasks from the System Summary dashboard:

Task Option

Task Steps

Blink the server
LED

a. In the Quick Launch Tasks pane, click System ID LED

ON/OFF and then click OK.
The LED starts blinking.

b. To stop the LED blinking, click System ID LED ON/OFF

again and then click OK.
The LED stops blinking.

Retrieve the
chassis serial
number

a. Click the Properties menu option in the menu bar, select

Details.
The System Details window is displayed.

b. In the Main System Chassis pane, check the chassis

serial number in the Node Id field.

Power up/down
the server

a. In the Quick Launch Tasks pane, click Power ON/OFF.

b. Click OK.

Additional tasks using the KVM console for VxFlex Ready Node R640/R740xd

servers

You can perform the following tasks from the KVM console server on a VxFlex Ready
Node server.

Before you begin

Ensure that you can access the KVM console.
Procedure

1. To activate the server LED, use one of the following methods:

On the dashboard, click Identify System, and then in the Success message
click OK.
The LED starts blinking.

To stop the LED from blinking, click Identify System again, and then click
OK.

Server Factory Reset and Power Operations

Dell EMC VxFlex Ready Node AMS User Guide

335

Summary of Contents for EMC VxFlex Ready Node



































































































































































































































































































































































Search results

Summary of Contents for EMC VxFlex Ready Node

Reviews:

Related manuals for EMC VxFlex Ready Node

Brands by name

Popular brands

Dell EMC VxFlex Ready Node, User Manual

Search results

Summary of Contents for EMC VxFlex Ready Node

Reviews:

Related manuals for EMC VxFlex Ready Node

Brands by name

Popular brands