Dell EMC VxFlex Ready Node User Manual Download Page 285

Page: 285 / 354

Parameter

Description

Action

None

MDM Data Degraded

Parameter

Description

Name

MDM_DATA_DEGRADED

Message

Some of the Storage Pool data is now in
Degraded state

Severity

Error

Description

Some of the Storage Pool data is in Degraded
state. This data is not protected against
another failure.

Action

The system is rebuilding the Degraded data to
return to Normal (protected) state. Check if
any hardware is malfunctioning and requires
replacement.

MDM Data Failed

Parameter

Description

Name

MDM_DATA_FAILED

Message

Some Storage Pool data is now unavailable

Severity

Critical

Description

Multiple failures have occurred. Some Storage
Pool data is now unavailable. This data cannot
be accessed.

Action

Locate and fix the failed hardware. If the
problem is not resolved, contact EMC
Support.

MDM Data Normal

Parameter

Description

Name

MDM_DATA_NORMAL

Message

All of the Storage Pool data has returned to
Normal state

Severity

Info

Description

All Storage Pool data previously in Degraded
or Failed state has returned back to Normal
state. User data is fully accessible and
protected.

System events

Dell EMC VxFlex Ready Node AMS User Guide

285

Summary of Contents for EMC VxFlex Ready Node



































































































































































































































































































































































Search results

Summary of Contents for EMC VxFlex Ready Node

Reviews:

Related manuals for EMC VxFlex Ready Node

Brands by name

Popular brands

Dell EMC VxFlex Ready Node, User Manual

Search results

Summary of Contents for EMC VxFlex Ready Node

Reviews:

Related manuals for EMC VxFlex Ready Node

Brands by name

Popular brands