Dell EMC VxFlex Ready Node User Manual Download Page 312

Page: 312 / 354

Table 34 VxFlex OS Alerts in SNMP, VxFlex OS GUI, REST, and ESRS (continued)

Alert Message in
VxFlex OS GUI

Alert Message in
REST

Alert
Message in
SNMP Trap

Alert Code
(for ESRS)

Severity

Recommended Action

cted_From_On
e_Sds

All SDCs are
disconnected from
the SDS IP address

ALL_SDC_DISCONNEC
TED_FROM_ONE_SDS
_IP

System.SDC.All
_Sdc_Disconne
cted_From_On
e_Sds_Ip

SIO01.07.000
0005

2 (Warning)

Check the network links
between all SDCs and the
affected SDS IP address.

All SDCs are
disconnected from
all SDSs

ALL_SDC_DISCONNEC
TED_FROM_ALL_SDS

System.SDC.All
_Sdc_Disconne
cted_From_All_
Sds

SIO01.07.000
0006

5 (Critical)

Check the network links
between all SDCs and
SDSs.

Disconnected
network links
between SDCs and
SDSs.

SDC_MULTIPLE_DISCO
NNECTIONS_FROM_S
DS

System.SDC.Sd
c_Multiple_Disc
onnections_Fro
m_Sds

SIO01.07.000
0007

5 (Critical)

Check the network links
between all SDCs and
SDSs.

This SDC has not
been approved

SDC_NOT_APPROVED

System.SDC.Sd
c_Not_Approve
d

SIO01.07.000
0008

2 (Warning)

Add the IP address for this
SDC to the list of approved
IP addresses.

This SDC does not
have an approved IP
address

SDC_DOES_NOT_HAV
E_APPROVED_IPS

System.SDC.Sd
c_Does_Not_H
ave_Approved_
Ips

SIO01.07.000
0009

2 (Warning)

Update the list of approved
IP addresses for this SDC.

SDC has an IP
address that is not
approved by the
MDM

SDC_HAS_UNAPPROV
ED_IP

System.SDC.Sd
c_Has_Unappr
oved_Ips

SIO01.07.000
0010

3 (Error)

Add the IP address for this
SDC to the list of approved
IP addresses.

Some of the the
approved SDC IP
addresses in the
MDM are not
recognized by AMS

SDC_HAS_UNKNOWN_
APPROVED_IP

System.SDC.Sd
c_Has_Unknow
n_Approved_Ip
s

SIO01.07.000
0011

2(Warning)

Right click the relevant
SDC, select "Configure
Approved IP Addresses",
and add the second data
link IP address

VxFlex Ready Node–specific Alerts in SNMP, VxFlex OS GUI, REST, and

ESRS

This table summarizes additional alerts generated by systems with AMS support.

Table 35 VxFlex Ready Node–specific Alerts in SNMP, VxFlex OS GUI, REST, and ESRS

Alert Message in
VxFlex OS GUI

Alert Message in
REST

Alert Message in
SNMP Trap

Alert Code
(for ESRS)

Severity

Recommended Action

Errors have been
detected on the
Physical Disk

PHYSICAL_DRIVE_
BAD_STATE

Storage_Controller.
Physical_Drive.BAD
_STATE

SIO06.01.000
0001

5 (Critical) Replace the Physical Disk.

SNMP Trap Support

312

Dell EMC VxFlex Ready Node AMS User Guide

Summary of Contents for EMC VxFlex Ready Node



































































































































































































































































































































































Search results

Summary of Contents for EMC VxFlex Ready Node

Reviews:

Related manuals for EMC VxFlex Ready Node

Brands by name

Popular brands

Dell EMC VxFlex Ready Node, User Manual

Search results

Summary of Contents for EMC VxFlex Ready Node

Reviews:

Related manuals for EMC VxFlex Ready Node

Brands by name

Popular brands