Dell EMC VxFlex Ready Node User Manual Download Page 214

Page: 214 / 354

Procedure

1. Log in to the VxFlex OS GUI as an admin user.

2. Go to Backend

Storage

Acceleration view.

3. Expand the SDSs in the Protection Domains.

4. In the Accelerated On column, find the FG Storage Pool that contains the DAX

devices you discovered in the previous task and recorded in the NVDIMM
information table.

For example, if you discovered DAX device name dax0.0, in the Accelerated On
column look for

/dev/dax0.0

In the following image, /dev/dax0.0 is located in FG Storage Pool sp2_FG. It is
also located in Acceleration Pool accp_for_sp2_NVDIMM.

Figure 40 FG Storage Pool with DAX device

5. Record the name of the FG Storage Pool, the Acceleration Pool, the storage

devices, and the DAX devices in the relevant rows in the NVDIMM information
table.

In the above example, the information you need to record is:

Storage Pool: sp2_FG

Acceleration Pool: accp_for_sp2_NVDIMM

Storage devices: /dev/sdb, dev/sdc

Acceleration devices: /dev/dax0.0, /dev/dax1.0.

6. Remove the storage devices you identified in the previous step from the

relevant Storage Pool:

a. Navigate to Backend

Devices view and find the SDS with the storage

devices you identified in the previous step.

Configuring the System using the VxFlex OS GUI

214

Dell EMC VxFlex Ready Node AMS User Guide

Summary of Contents for EMC VxFlex Ready Node



































































































































































































































































































































































Search results

Summary of Contents for EMC VxFlex Ready Node

Reviews:

Related manuals for EMC VxFlex Ready Node

Brands by name

Popular brands

Dell EMC VxFlex Ready Node, User Manual

Search results

Summary of Contents for EMC VxFlex Ready Node

Reviews:

Related manuals for EMC VxFlex Ready Node

Brands by name

Popular brands