manualshive.com logo in svg

Dell EMC PowerEdge VRTX, User Manual

The Dell EMC PowerEdge VRTX is a versatile all-in-one solution for small to medium-sized businesses. Easily manage your system with our comprehensive User Manual, available for free download from our website. Get the most out of your PowerEdge VRTX with this essential manual.

Share
Download
background image

13

Managing Fabrics

The chassis supports a fabric type, which is Fabric A. Fabric A is used by the single I/O Module, and is always connected to the on-
board Ethernet adapters of the servers.
The chassis has only one I/O module (IOM), where the IOM is a pass-through or switch module. The I/O Module is classified as 
group A.
Chassis IOM uses a discrete data path called 

Fabric

, and it is named A. The Fabric A supports only Ethernet. Each server IO adapter 

(Mezzanine Card or LOM) can have either two or four ports depending on the capability. The mezzanine card slots are occupied by 
PCIe extension cards that are connected to PCIe cards (and not to IO modules). When you deploy the Ethernet, iSCSI, or 
FibreChannel networks, span their redundant links across banks one and two for maximum availability. The discrete IOM is identified

 

with a fabric identifier.

NOTE: In the CMC CLI, the IOM is referred to by the convention, switch.

 

Fresh Power-up Scenario

When the chassis is plugged in and turned on, the I/O module has priority over the servers. The IOM is allowed to turn on before the 
others. At this time, verification of their fabric types is not performed.
After the IOMs turn on, the servers turn on, and then CMC verifies the servers for fabric consistency.
A pass-through module and switch are allowed in the same group if their fabric is identical. Switches and pass-through modules can 
exist in the same group even if they are manufactured by different vendors.

Monitoring IOM Health

For information about monitoring IOM health, see 

Viewing Information and Health Status of the IOM

.

Configuring Network Settings for IOM

You can specify the network settings for the interface used to manage the IOM. For Ethernet switches, the out-of-band 
management port (IP address) is configured. The in-band management port (that is, VLAN1) is not configured using this interface.
Before configuring the network settings for the IOM, make sure the IOM is turned on.
To configure the network setting of IOM in Group A, you must have the Fabric A Administrator privileges.

NOTE: For Ethernet switches, the in-band (VLAN1) and out-of-band management IP addresses cannot be the same, or 
cannot be on the same network. This results in the out-of-band IP address in being not set. See the IOM documentation 
for the default in-band management IP address.

NOTE: Do not configure I/O module network settings for Ethernet pass-through and Infiniband switches.

Configuring Network Settings for IOM Using CMC Web Interface

To configure the network settings for I/O Module:

1.

In the left pane, click 

Chassis Overview

, click 

I/O Module Overview

, and then click 

Setup

. Alternatively, to configure the 

network settings of the only available I/O module that is 

A

, click 

A Gigabit Ethernet

, and then click 

Setup

.

152

Summary of Contents for EMC PowerEdge VRTX

















































































































































































































Reviews:

No comments

Related manuals for EMC PowerEdge VRTX

UNITED 7700 Series Maintenance & Operation Manual preview
7700 Series
Brand: UNITED Pages: 8
Hama Outlandish Operating Instruction preview
Outlandish
Brand: Hama Pages: 17
Harman AMX JPK-1300 Quick Start Manual preview
AMX JPK-1300
Brand: Harman Pages: 2
T-Link TL300 Quick Install Manual preview
TL300
Brand: T-Link Pages: 3
Jabra 14201-20 - How To Connect preview
14201-20 -
Brand: Jabra Pages: 3
GBD F4 Instructions For Installation Manual preview
F4
Brand: GBD Pages: 15
M-Audio Axiom AIR 25 Service Manual preview
Axiom AIR 25
Brand: M-Audio Pages: 26
M Climate Bobbie Installation Instructions Manual preview
Bobbie
Brand: M Climate Pages: 12
OBSIDIAN CONTROL SYSTEMS NX1 Installation Manual preview
NX1
Brand: OBSIDIAN CONTROL SYSTEMS Pages: 13
Eaton Cutler-Hammer Jockey Instructions Manual preview
Cutler-Hammer Jockey
Brand: Eaton Pages: 12
Kampmann 197901960988 Manual preview
197901960988
Brand: Kampmann Pages: 5
Vageo DT-CH Manual preview
DT-CH
Brand: Vageo Pages: 2
Waeco MagicSpeed Series Installation And Operating Manual preview
MagicSpeed Series
Brand: Waeco Pages: 76
Brand Innovations BI-0316 Technical Manual preview
BI-0316
Brand: Brand Innovations Pages: 56
Hiwin RC4 Original Instruction preview
RC4
Brand: Hiwin Pages: 99
Becker CentralControl CC41 Manual preview
CentralControl CC41
Brand: Becker Pages: 48
GSK 983Ma-H Connection Manual preview
983Ma-H
Brand: GSK Pages: 32
Widex RC4-1 User Instructions preview
RC4-1
Brand: Widex Pages: 17

Brands by name

Popular brands

Load more brands