manualshive.com logo in svg

Dell EMC PowerEdge VRTX, User Manual

Share
Download
Dell EMC PowerEdge VRTX User Manual Download Page 146

NOTE: Note the following:

•

If a slot is not selected, FlexAddress is not enabled for the selected fabric.

•

When none of the fabrics are selected and a server slot is selected and applied, the following message is displayed 

No 

fabrics selected! FlexAddress will not be used on this chassis.

 Select both the fabric and 

the slot to successfully configure FlexAddress.

•

Configuring Flexaddress for slave slot is not allowed. The option is greyed out in the CMC Web interface. The Ethernet 
devices associated with the slave slot of the server, inherits the master slot configuration.

4.

To save the settings, click 

Apply

.

Configuring FlexAddress for Chassis-Level Fabric and Slots Using RACADM

To enable or disable fabrics, use the following RACADM command:

racadm setflexaddr [-f 

<fabricName> <state>

]

where, 

<fabricName>

 = A or iDRAC

 and 

<state>

 = 0 or 1

0 is disable and 1 is enable.
To enable or disable slots, use the following RACADM command:

racadm setflexaddr [-i 

<slot#> <state>

where, 

<slot#>

 = 1 or 4

 and 

<state>

 = 0 or 1

0 is disable and 1 is enable.
For more information about the 

setflexaddr

 command, see the 

Chassis Management Controller for PowerEdge VRTX RACADM 

Command Line Reference Guide

.

NOTE: If you purchase the FlexAddress or FlexAddressPlus feature with your Dell PowerEdge VRTX, it is preinstalled and 
enabled for all slots and fabrics. To purchase this feature, contact Dell at dell.com.

NOTE: By using the 

racresetcfg

 subcommand, you can reset the Flex Address of a CMC to its factory-default setting, 

which is “disabled”. The RACADM syntax is:

racadm racresetcfg -c flex

For more information about the FlexAddress-related RACADM commands and data about the other factory-default 
properties, see the 

Chassis Management Controller for PowerEdge VRTX RACADM Command Line Reference Guide 

available at dell.com/cmcmanuals.

Viewing World Wide Name or Media Access Control Addresses

The 

WWN/MAC Summary

 page allows you to view the World Wide Name (WWN) configuration and Media Access Control (MAC) 

address of a slot in the chassis.

Fabric Configuration

The 

Fabric Configuration 

section displays the type of Input/Output fabric that is installed for Fabric A. A green check mark indicates 

that the fabric is enabled for FlexAddress. The FlexAddress feature is used to deploy chassis assigned and slot persistent 
WWN/MAC addresses to various fabrics and slots within the chassis. This feature is enabled on a per-fabric and per-slot–basis.

NOTE: For more information about the FlexAddress feature, see 

About FlexAddress

.

Viewing WWN or MAC Address Information

You can view the WWW/MAC address inventory of Network Adapters for each server slot or all servers in a chassis. The inventory 
includes the following:

•

Fabric Configuration

146

Summary of Contents for EMC PowerEdge VRTX

















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands