Dell EMC PowerEdge VRTX, User Manual

Page: 118 / 208

Table 22. : Default Role Group Privileges
Role Group Default Privilege Level Permissions Granted Bit Mask
1 None
• CMC Login User
• Chassis Configuration Administrator
• User Configuration Administrator
• Clear Logs Administrator
• Chassis Control Administrator (Power Commands)
• Server Administrator
• Test Alert User
• Debug Command Administrator
• Fabric A Administrator
0x00000fff
2 None
• CMC Login User
• Clear Logs Administrator
• Chassis Control Administrator (Power Commands)
• Server Administrator
• Test Alert User
• Fabric A Administrator
0x00000ed9
3 None CMC Login User 0x00000001
4 None No assigned permissions 0x00000000
5 None No assigned permissions 0x00000000
NOTE: The Bit Mask values are used only when setting Standard Schema with the RACADM.
NOTE: For more information about user privileges, see Types of Users .
Configuring Standard Schema Active Directory
To configure CMC for an Active Directory login access:
1. On an Active Directory server (domain controller), open Active Directory Users and Computers Snap-in .
2. Using the CMC Web interface or RACADM:
a. Create a group or select an existing group.
b. Configure the role privileges.
3. Add the Active Directory user as a member of the Active Directory group to access CMC.
Configuring Active Directory With Standard Schema Using CMC Web Interface
NOTE: For information about the various fields, see the
CMC Online Help
.
1. In the left pane, go to Chassis Overview , and then click User Authentication → Directory Services . The Directory Services
page is displayed.
2. Select Microsoft Active Directory (Standard Schema) . The settings to be configured for standard schema is displayed on the
same page.
3. In the Common Settings section, specify the following:
• Select Enable Active Directory and enter the timeout value for Active Directory in the AD Timeout field.
• To obtain the Active Directory Domain Controllers from a DNS lookup select Look Up Domain Controllers with DNS , and
then select one of the following:
– User Domain from Login — to perform the DNS lookup with the domain name of the login user.
– Specify a Domain — enter the domain name to use for the DNS lookup
118