manualshive.com logo in svg

Dell EMC PowerEdge VRTX, User Manual

Share
Download
Dell EMC PowerEdge VRTX User Manual Download Page 188

•

Sensor information

•

Firmware build information

Supported Interfaces

•

CLI RACADM

•

Remote RACADM

•

Telnet RACADM

racdump

 includes the following subsystems and aggregates the following RACADM commands. For more information about 

racdump

, see the 

RACADM Command Line Reference Guide for CMC in PowerEdge VRTX

.

Table 41. Racadm commands for subsystems

Subsystem

RACADM Command

General System/RAC information

getsysinfo

Session information

getssninfo

Sensor information

getsensorinfo

Switches information (IO Module)

getioinfo

Mezzanine card information (Daughter card)

getdcinfo

All modules information

getmodinfo

Power budget information

getpbinfo

KVM information

getkvminfo

NIC information (CMC module)

getniccfg

Redundancy information

getredundancymode

Trace log information

gettracelog

RAC event log

getraclog

System event log

getsel

Downloading SNMP Management Information Base File

The CMC SNMP Management Information Base (MIB) file defines the chassis types, events, and indicators. CMC enables you to 
download the MIB file using the web interface.
To download the CMC's SNMP MIB file using the CMC web interface:

1.

In the left pane, click 

Chassis Overview

 → 

Network 

→ 

Services 

→ 

SNMP

.

2.

In the

 SNMP Configuration

 section, click

 Save

 to download the CMC MIB file to your local system.

For more information about the SNMP MIB file, see the 

Dell OpenManage Server Administrator SNMP Reference Guide 

at 

dell.com/support/manuals.

First Steps to Troubleshoot a Remote System

The following questions are commonly used to troubleshoot high-level issues in the managed system:

•

Is the system turned on or turned off?

•

If turned on, is the operating system functioning, not responding, or stopped functioning?

•

If turned off, did the power turn off unexpectedly?

188

Summary of Contents for EMC PowerEdge VRTX

















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands