Dell 2135CN, Service Manual

Page: 484 / 896

2 - 25
Chapter 2 Operation of Diag.
Version 1 2008.02.01
Sub Motor (DO-5/DO-6/DO-7)
The rotational speed of the motor is as follows.
DO-7<DO-5<DO-6
1) Turn on the power and enter the Printer Diag.
2) Execute the DO-5.
3) Check the Exit Roll rotation.
4) Press the "Cancel" key to stop the test.
K Mode SOLENOID (DO-a)
(Color Mode Switching Sen-
sor)
NOTE: These procedures are for the technical staff.
When performing operation for five minutes or longer with the front
cover open, remove the PHD ASSY, and cover the drum to avoid
exposure to light.
1) Remove the DRIVE ASSY PH.
2) Cheat the safety Interlock System.
3) Turn on the power and enter the Printer Diag.
4) Execute the DO-a.
5) Check the K Mode SOLENOID movement.
6) Press the "Cancel" key to stop the test.
7) Turn off the printer power.
8) Attach the DRIVE ASSY PH.
9) Remove the cheater and turn on the printer power.
Clutch and Solenoid name
(Diag. Code)
Confirmation procedure
Mnt02012KA
Exit Roll
Mnt02013KA
K Mode Solenoid