1 - 368
Chapter 1 Troubleshooting
Version 3 2008.06.13
6
Checking the Toner Type
Is the Non-Dell Toner seated?
Replace the toner
with the Dell toner,
then go to step 7.
Go to step 8.
7
Is the image printed correctly?
End of work.
Replace the
PWBA CONT
AIO. (Refer to
Removal 24/
Replacement 36.)
8
Checking after reseating all TONER CARTRIDGEs (Y/M/C/
K)
Reseat the TONER CARTRIDGEs, and check that their lock
keys are in the lock positions.
Is the image printed correctly?
End of work.
Go to step 9.
9
Checking the TRANSFER ASSY for connection
Open the COVER ASSY FRONT.
Are four HV terminals on the TRANSFER ASSY, and four
springs on the frame (PL4.1.11, 12, 13 and 14) dirty and/or
deformed?
Clean or replace
the TRANSFER
ASSY or
SPRING(s), then
go to step 10.
Go to step 11.
10
Is the image printed correctly?
End of work.
Go to step 11.
11
Checking the paper condition
Is the paper dry and recommended paper?
Go to step 13.
Replace the paper
with a new dry and
recommended
one, then go to
step 12.
12
Is the image printed correctly?
End of work.
Go to step 13.
13
Checking the life counter value of the TONER
CARTRIDGEs
Checked by [Parameter]-[Life Y/M/C/K Toner] of [IOT Diag]
in [Printer Diag] of diagnosis.
Does the remainder value show the near of the end? (Refer
to Chapter 2 for details of the life counter value.)
Replace the
TONER
CARTRIDGE(s).
(Refer to Removal
7/ Replacement
53.)
Go to step 14.
14
Checking the laser beam windows of the ROS ASSY
Are the laser beam windows on the ROS ASSY clean?
Go to step 15.
Clean the
window(s) with
soft cloth or cotton
swab gently.
15
Checking the laser beam path
Are there any foreign substances between the ROS ASSY
and PHD UNIT?
Remove the
foreign
substances.
Go to step 16.
Step
Check
Remedy
Yes
No
Summary of Contents for 2135CN
