1 - 293
Chapter 1 Troubleshooting
Version 2 2008.03.31
FIP-1. 62 Paper Jam 071-100/077-102
Step
Check
Remedy
Yes
No
Possible causative parts:
CASSETTE ASSY 250 (PL2.1.1)
SEPARATOR ROLLER ASSEMBLY (PL2.1.5)
CLUTCH ASSY DRV (PL3.1.1)
SOLENOID FEED (PL3.1.11)
ROLL ASSY FEED (PL3.2.4)
ACTUATOR REGI ROLL (PL3.2.8)
ACTUATOR REGI IN (PL3.2.11)
SENSOR PHOTO (PL3.2.13)
DRIVE ASSY MAIN (PL7.1.2)
DRIVE ASSY PH (PL7.1.4)
HARN ASSY L SIDE (PL10.4.18)
PWBA MCU (PL10.7.7)
HARN ASSY MAIN MOT (PL10.8.7)
HARN ASSY KSNR REGCL (PL10.8.9)
1
Checking the paper condition
Is the paper in the Tray 1 wrinkled or damaged?
Replace the paper
with a new and dry
one, then go to
step 2.
Go to step 3.
2
Does the error still occur when printing?
Go to step 3.
End of work.
3
Checking after reloading a new paper
Reload a new paper in the Tray 1.
Does the error still occur when printing?
Go to step 4.
End of work.
4
Checking the COVER ASSY FRONT for latching
Open and close the COVER ASSY FRONT, and then latch
correctly.
Does the error still occur when printing?
Go to step 5.
End of work.
5
Checking the Main Motor (DRIVE ASSY MAIN) for
operation
Does the Main Motor (DRIVE ASSY MAIN) operate
properly?
Checked by [Digital Output]-[DO-00] of the [IOT Diag] on the
[Printer] of the diagnosis.
During this check, cheat the interlock switch (HARN ASSY
INTERLOCK).
Go to step 6.
Go to step 18.
6
Checking the DRIVE ASSY PH for operation
Does the ROLL ASSY FEED, ROLL ASSY REGI and ROLL
REGI METAL rotate properly?
Checked by [Digital Output]-[DO-0B] of the [IOT Diag] on
the [Printer] of the diagnosis.
During this check, cheat the interlock switch (HARN ASSY
INTERLOCK).
Go to step 7.
Reseat or replace
the DRIVE ASSY
PH. (Refer to
Removal 32/
Replacement 28.)
7
Checking the paper feeding position
Is the paper not fed from the Tray 1?
Go to step 8.
Go to step 12.
8
Checking after resetting the Guide Sides and End Guide on
the Tray 1
Reset the Guide Sides and End Guide, and reseat the Tray
1 to the printer correctly.
Does the error still occur when printing?
Go to step 9.
End of work.
Summary of Contents for 2135CN
