You can use the following copy features:
ID card copying
Your machine can print 2-sided originals on one sheet of A4-, Letter-, Legal-, Folio-, Executive-, B5, A5, or A6-sized
paper.
The machine prints one side of the original on the upper half of the paper and the other side on the lower half
without reducing the size of the original. This feature is helpful for copying a small-sized item, such as a business
card.
This copy feature is available only when you place originals on the scanner glass.
The size of the 2-sided originals should be smaller than A5, if not, some of it won’t be copied.
1.
Press
ID Copy
on the control panel.
2.
Place Front Side and Press [Start]
appears on the display.
3.
Place the front side of an original facing down on the scanner glass where arrows indicate as shown, and close
the scanner lid.
4.
Press
OK
on the control panel.
Your machine begins scanning the front side and shows
Place Back Side and Press [Start]
.
5.
Turn the original over and place it on the scanner glass, where arrows indicate as shown then, close the scanner
lid.
6.
Press
OK
on the control panel to begin copying.
If the original is larger than the printable area, some portions may not be printed.
If you don’t press the
OK
button, only the front side will be copied.
If you press
Stop/Clear
(
), the machine cancles the copy job and returns to ready mode.
2-up or 4-up copying (N-up)
The machine reduces the size of the original images and prints 2 or 4 pages onto one sheet of paper.
1.
Press
Copy
(
) on the control panel.
2.
Press
Menu
(
) on the control panel.
3.
Press the left/right arrow until
Copy Feature
appears and press
OK
.
4.
Press the left/right arrow until
Layout
appears and press
OK
.
5.
Press the left/right arrow until
2-Up
or
4-Up
appears and press
OK
.
6.
When
Yes
appears, press
OK
.
7.
Press
Start
(
) on the control panel to begin copying.