Dell 1135 Mono Laser User Manual Download

Page: 105 / 138

Specifications

This chapter include:

Hardware specifications
Environmental specifications
Electrical specifications
Print media specifications

The specification values are listed below, specification are subject to change without notice. See

www.dell.com

support.dell.com/manuals

for possible changes in information.

Hardware specifications

Item

Description

Dimensions

Height

318.9 mm (12.6 inches)

Depth

415.4 mm (16.4 inches)

Width

416 mm (16.4 inches)

Weight

Machine with consumables 11.55 Kg (25.46 lbs)

Package weight Paper

2.29 Kg (5.05 lbs)

Plastic

0.49 Kg (1.07 lbs)

Environmental specifications

Item

Description

Noise Level

[

]

Ready mode

26 dB(A)

Printing mode

50 dB(A)

Copying mode (scanner glass)

50 dB(A)

Copying mode (document feeder)

52 dB(A)

Temperature

Operation

10 to 32 °C (50 to 90 °F)

Storage (unpacked)

0 to 40 °C (32 to 104 °F)

Humidity

Operation

20 to 80% RH

Storage (unpacked)

10 to 80% RH

[

]

Sound Pressure Level, ISO 7779. Configuration tested: machine basic installation, A4 paper, simplex printing.

Electrical specifications

Power requirements are based on the country/region where the device is sold.
Do not convert operating voltages. Doing so might damage the device and void the product warranty.

Item

Description

Power rating

[

]

110 volt models

AC 110 - 127 V

220 volt models

AC 220 - 240 V

Power consumption

Average operating mode

Less than 370 W

Ready mode

Less than 45 W

Power save mode

Less than 10 W

Power off mode

Less than 1 W

[

]

See the rating label on the machine for the correct voltage, frequency (hertz) and type of current for your

machine.

Summary of Contents for 1135 Mono Laser











































































































































Search results

Summary of Contents for 1135 Mono Laser

Reviews:

Related manuals for 1135 Mono Laser

Brands by name

Popular brands

Dell 1135 Mono Laser, User Manual

Search results

Summary of Contents for 1135 Mono Laser

Reviews:

Related manuals for 1135 Mono Laser

Brands by name

Popular brands