Dell 1135 Mono Laser User Manual Download

Page: 116 / 138

Replace the toner cartridge and close the front door. Printing automatically resumes.

In exit area

Open and close the front door. The jammed paper is automatically ejected from the machine.
If you do not see the jammed paper, go to next step.

Gently pull the paper out of the output tray.

If you do not see the jammed paper or if there is any resistance when you pull, stop and go to the next step.

Open the rear door.

Pull the pressure levers down and remove the paper.

Pressure lever

If you do not see the jammed paper, go to next step.

Pull the fuser cover levers down and remove the paper.
Return the fuser cover levers to their original position.

Summary of Contents for 1135 Mono Laser











































































































































Search results

Summary of Contents for 1135 Mono Laser

Reviews:

Related manuals for 1135 Mono Laser

Brands by name

Popular brands

Dell 1135 Mono Laser, User Manual

Search results

Summary of Contents for 1135 Mono Laser

Reviews:

Related manuals for 1135 Mono Laser

Brands by name

Popular brands